7 Steps To Maintain Your Double Glazing Windows And Doors

If you’re not careful, dirt and grime will build up on your windows and doors. This can make your home feel colder in the winter months and more expensive to heat. It can also lead to you having to replace your double glazing faster than expected.

In order to avoid extra costs and a cold house throughout winter, it’s important that you invest some time into maintaining your windows and doors regularly.

Below we’ll look at seven easy ways to keep double glazing windows Melbourne clean so that they last as long as possible!

Clean your windows

You should clean your windows with a soft cloth or window cleaning product. You can also use vinegar and water to remove any grime on the surface of your windows.

If you have double glazed windows, it is important that you clean both sides of them because most people only clean one side of their double glazed windows and doors which causes condensation between the panes of glass leading to foggy vision when looking through them.

1.Use a window cleaner to clean your windows

There are many different types of cleaners on the market and you should choose one that’s designed for use on glass surfaces. A soft cloth or a window cleaning product is best for this step. You should also clean the outside of your windows with a soft cloth or window cleaning product, as well as inside your windows with just water.

2.Examine the weather stripping around your doors

Check for cracks or tears in it, and if there are any, use a silicone sealant to repair them. You can also use a screwdriver to tighten any screws that have become loose over time.

3.Examine the seals around your doors and windows

• Check for any gaps in the seals.
• Check for any loose or broken seals.
• Inspect the seals for cracks, damage and discolouration (e.g., white patches).
• If you see mould or mildew on your door/window frames, it’s likely that these areas are letting moisture into your home through the glass panes.

4.Check the seals around your doors and windows

Check the seals around your doors and windows to make sure they are in good condition. This will prevent water from entering the building through gaps and cracks, as well as preventing heat loss through poorly sealed glass units.

There are a few ways to check that your seals are in good condition:

• Check for any gaps in the seal with a torch or flashlight (you may need someone else’s help). You should be able to see light between each pane of glass when viewed at night with no lights on inside or outside of the property; this indicates there is not enough silicone used during installation which means more energy could escape through these areas if left unchecked
• Look for cracks along edges where two pieces meet together; if found then these needs repairing immediately so they don’t get worse over time causing further damage such as leaks due to water getting trapped between panes

5.Removing water marks from double glazed windows

Removing water marks from double glazing windows Melbourne can be as simple as wiping them with a warm damp cloth, or using a store bought window cleaner designed for use on glass surfaces.

You should always try to avoid using harsh chemicals for cleaning purposes as they can damage the paint work on your windows and doors.

Clean the outside of the window with a soft cloth or a window cleaning product

• Clean the outside of the window with a soft cloth or a window cleaning product.
• Use a soft cloth to clean the outside of the window, and then rinse it with water.
• If you have any streaks left on your windows after using soap and water, try using vinegar instead of soap next time!
• Clean the inside of your windows with a soft cloth and water to remove any dust or grime on the surface. Avoid using abrasive materials such as steel wool, which can scratch the glass. Also, do not use window cleaning products on toughened glass as they may contain chemicals that could damage it over time.

6.Use a silicon-based or ammonia free glass cleaner

You should never use abrasive cleaners to clean your double glazed windows and doors, as this will scratch the glass and reduce its effectiveness. The best way to clean toughened glass is with a soft cloth dipped in warm water with some detergent added, then wrung out until just damp before wiping down the window pane. You can also use an ammonia-free window cleaner if you prefer (though remember that these are typically more expensive than ordinary ones).

7.Seek help of professionals

Professional help is always best.

If you have decided to clean your windows and doors yourself, it’s important to know that there are some things that shouldn’t be done by amateurs. You may want to hire professional window cleaners or glaziers if any of these situations apply:

• Your double glazing windows and doors are very high off the ground (more than 1 meter).
• You have very small children or pets in the house who could accidentally fall out of them if they’re open too far.
• You have elderly people living in the house who might need help getting around safely when there aren’t any barriers between them and potential dangers such as stairs or glass surfaces on which they could slip while cleaning these surfaces themselves

Maintaining good quality double glazing will help keep out cold air and save money!

The first thing you can do to maintain your double glazing windows and doors is to clean them regularly. This will help to keep out cold air, which means that your home will be warmer in winter and save money on heating bills.

Conclusion

Maintaining your windows and doors is a great way to save money on your energy bills and keep out cold air. If you follow these 7 steps, you’ll be able to keep your double glazing windows Melbourne in good condition for years!