Tips To Use An Eyewash Station During An Emergency
Chemical Storage Cabinet might occur in a hazardous area. It might be dangerous to go to the area without spill kits and proper protection for the individuals in charge. However, if there is irritation or burning sensation in the eye, the immediate thing to do would be to seek the Best Oil Spill Kit that would help in saving your sight. Such incidents can be very rare. However, one should be prepared for the worst and set up an eyewash station to avoid the worst from happening. Take a look at some of the tips to make use of the Eyewash station in an emergency.
Don’t Delay: The moment a hazardous material enters your eyes; you should rush to an eyewash station. The eyewash station should be set up no more than a ten-second walk away from any hazardous situation. All the safety equipment should be signposted clearly. Make sure that everyone is trained well about the location of various safety stations before they handle any hazardous substances. Never do hesitate even if it is just a minor spill. The longer a hazardous substance is in contact with the eye, the more chances are there for the increased damage it might cause. Even minor amounts of contamination can cause serious injury and permanent loss of vision.
Activate the Unit: Make sure that you push the lever on the eyewash station. The lever should be marked and should be operable with a single easy motion. All the staff members should be well-aware of the location of the eyewash station so that they can help and assist the ones during an emergency. Once you push the lever, the dust covers would open up quickly and two eyewash nozzles would immediately discharge water.
Flush Out the Eyes: Once the eyewash station is activated, it would continuously discharge the water. You should discharge it for a minimum of 15 minutes and it can be operated hands-free. Make use of your fingers to keep your eyes open and lower the eyes into the stream of water that is spraying out of the nozzles. Roll the eyes slowly in all directions so that it makes sure that the water reaches as much in the eyeballs as possible.
Contact Lenses: If the affected person is wearing any kind of contact lenses, gently remove them as the flushing process begins. If you fail to remove the contact lenses, the proper irrigation process might get interrupted. Hence, it is important to not delay flushing to take them out. You can remove the lenses only after the flushing process begins.
Keep Flushing: The affected person should continue to use the eyewash station for at least 15 minutes and no less. This is the minimum amount of time that would take to sufficiently clear the eyes from the harmful chemicals. However, if you remove your eyes from the stream before this time limit, you might take the risk of getting a permanent injury.
Once the flushing is complete, seek immediate medical assistance. Ask someone to drive you to the accident and emergency department in a local hospital. Never decide to drive down yourself as your vision might get impaired.
Multiply Your Profits at Low Cost. Call Now for Free Consultation. A Performance-based Digital Agency offering the Best Digital Marketing Services. Blurn, Sydney. Visit : https://blurn.com/au/