Keeping your pool clean is a year-round job, but it’s especially important during the summer months. In this guide, we’ll go over the basics of pool maintenance in Melbourne—from cleaning to chemical balancing—so you can enjoy a swim without worrying about the upkeep.

First, let’s take a look at some of the most common pool problems and how to solve them. Then we’ll go over some tips for keeping your pool clean and looking its best all season long. Let’s get started!

The Importance of Outdoor Pool Maintenance

It’s summertime, and that means it’s time to break out the pool! But before you do, it’s important to do a quick check and make sure everything is in good shape. That’s where outdoor pool maintenance comes in.

By maintaining your pool, you can ensure that everyone stays safe while they’re swimming and make sure the water stays clean and refreshing all season long. It’s not a difficult process, but it’s important to follow the right steps.

Here is a guide to outdoor pool maintenance in Melbourne that will help you keep your pool in perfect condition all summer long.

MAINTAIN THE PROPER BALANCE OF CHEMICALS

When you’re looking to properly maintain your outdoor pool for the summer, it’s important to keep the pH balance in check. This means keeping the levels of acid and base in the water at a steady 7.2. Too much acid will corrode your pool’s surface, while too much base will create a murky green color and scaled surfaces.

To do this, you’ll need to regularly test the water and add chemicals as needed to maintain that pH balance. 

Chlorine is a common pool chemical that helps to kill bacteria, while soda ash is used to raise the pH levels. muriatic acid is used to lower pH levels. It’s important to use these chemicals sparingly, as too much can be just as harmful as too little.

MONITOR WATER LEVELS

It’s important to monitor the water levels in your pool during the summer. If the water is too deep, it can be a safety hazard. If it’s too shallow, your pool won’t be able to generate enough of its own heat to keep itself warm, and you’ll have to spend extra money on your heating bill.

Ideally, you should have a water level that’s between two and four feet deep. Make sure you check the water level at least once a week, and adjust it as necessary. 

You can use either a stick or a pole to measure the depth of the water; if you’re using a stick, make sure it’s marked in increments so that you can more easily gage the depth.

SCHEDULE A YEARLY SERVICE APPOINTMENT

It’s important to schedule a yearly pool maintenance service appointment for your outdoor pool to keep things running smoothly. After all, your swimming pool is more than just a backyard attraction—it’s an investment that needs to stay well-maintained throughout the summer.

During your pool repairs Melbourne service appointment, your pool technician will check that the filter and pump are running efficiently, inspect the water chemistry to make sure it’s balanced, and check for any leaks or cracks. In addition, they’ll ensure the safety features like automated covers and alarms are in working order and ready for use.

Of course, you’ll want to be sure to work with someone experienced and reliable when it comes to scheduling a yearly service appointment—so ask around and get recommendations from friends or other local pool owners. 

If you’re not sure who to go with in your area, you can always check online reviews or ask your local hardware store for recommendations.

SKIM, SCRUB, AND VACUUM

You should make it a routine to skim debris off the top of your pool’s water each day. Once they reach the pool’s bottom, various detritus, such as leaves, are more difficult to remove. In order to keep the pool liner fresh and clean, you shouldn’t scrub the pool’s sides every day but at least once every other week.

Another excellent strategy to keep your water clean and lower the quantity of chemicals you need to add to it is to vacuum your pool at least once a week. 

If you have a manual pool vacuum, use it on your carpet similarly to how you would an indoor vacuum while slightly overlapping each stroke. 

Shock your pool 

After a rainstorm or when the pool has been overcrowded, use a pool shock to sanitise the water. Some experts advise shocking the pool at dusk or at night to avoid the sun “eating up” the chlorine. 

Shock treatment is an important part of summertime pool maintenance Melbourne that helps to keep the pool water crystal clear and free of contaminants. 

Shocking your pool involves adding a large amount of chlorine to the water, raising the chlorine levels to shock level, and then measuring and maintaining them at that level for 24 hours. 

Clean Your Pool Filter 

Clean and efficient pool filters are essential to a safe and healthy swimming environment. As part of your summertime pool maintenance routine, it’s important to clean your pool filter regularly.

The filter works by using a pump to circulate the pool water through the filter, trapping dirt, debris, and other unwanted contaminants in the process. Over time, these contaminants build up, reducing the efficiency of the filter and eventually leading to pool repairs Melbourne   problems with water clarity and sanitation.

To prevent these problems from occurring, it’s important to regularly clean the filter. The most common method is to backwash the filter, which involves reversing the flow of water through the filter, flushing out the captured contaminants. This should be done on a regular basis, and it should also be done when the pressure on the filter is too high.

Conclusion

In conclusion, pool maintenance Melbourne is a necessary chore, but it’s one that’s worth taking the time to do right. By following these simple tips, you can keep your pool looking and running great all summer long.