Is It Possible To Clean The Pool Without Emptying It?
You love your swimming pool. You spend a lot of time there in the summer and you’d like to keep it clean. But you also don’t want to have to empty out all the water every time you clean it, which can be a real pain in the neck! It’s important to get the pool clean by a pool maintenance Melbourne expert on a regular basis.
Luckily, there are some things that you can do to keep your pool clean without having to take such drastic actions:
Clean Pool Surrounds
Cleaning the pool surrounds is an essential part of keeping your pool clean. Two parts of this pool maintenance Melbourne process are cleaning the walls and the deck.
- Use a brush to scrub the walls of your above-ground or in-ground pool. If you have an in-ground pool, run around it with a long-handled brush or push/pull yourself around on a long pole until every surface has been cleaned.
- For above-ground pools, use soft sponges to clean all surfaces by hand. For example, place one sponge inside each ring on your ladder so that water doesn’t collect thereafter use (or place another sponge on top). Make sure you dry off any wet spots before using them again!
Add Plenty of Chlorine to the Water
You can add chlorine to the pool if it’s empty, but you’ll need to make sure you don’t add too much or too little. It might seem like adding more chlorine would be better, but this isn’t necessarily true. The correct chlorine level for your pool depends on many factors, including its size and how often someone uses it.
Use a Vacuum to Clean the Pool Floor
Here’s a good way to keep your pool clean without emptying it: use a vacuum. This is especially useful if you’re a swimmer who often gets into the water when it’s dirty and for people who like to avoid emptying their pools as much as possible.
There are two different ways you can use this method: either before adding chlorine or after adding chlorine.
First of all, let’s talk about what kind of vacuum you should get.
If there are no specific recommendations from your local pool store (which we’ll discuss next), then make sure that the vacuum has a built-in pump so that both liquid and solid debris can be removed from the bottom of your pool without spilling out onto the floor nearby.
Run the Pool Filter
The easiest way to clean your pool is to simply run the filter for an hour or two. If you have a leaf guard, this can be accomplished by simply turning it on and letting it do its job. If you don’t have a leaf guard, however, then you will need to remove any debris from the bottom of your pool with a net or skimmer before beginning the pool maintenance Melbourne process.
Once your filter has been running for at least an hour (and preferably two), turn off the pump and take some time to look at what’s inside of it. Are there any leaves in there? Do they need to be removed? If so, use your net or skimmer again if necessary!
If there are no visible particles in the filter basket after 1-2 hours of running time, turn off your pump once again and allow everything to settle before proceeding with steps 4 through 6 below. Consult pool repairs Melbourne expert if you are unable to achieve a healthy pool.
It is possible to clean a swimming pool without draining it. However, this should only be done if the pool has not been used for several days and there are no signs of algae or large amounts of debris.
If you want to keep your pool clean all year round, then regular maintenance services are recommended.